NEC Express5800 Series Maintenance Manual page 130

Express server
Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 3 Appendix
Microsoft-Windows-Hyper
-V-VMMS
15350
While the system is running
Windows Server 2008 R2
System Event Log
iScsiPrt
1
When Windows Server 2008 R2 is
operating while iSCSI is recognized
b57nd60a
4
Upon system startup or upon applying
Starter Pack
l2nd
4
Upon system startup or upon applying
Starter Pack
l2nd
4
Upon system startup or upon applying
Starter Pack
130
Error
Virtual Infrastructure Drive (VID) is not running.
This event is logged at shutdown for activation of Windows Server 2012
Hyper-V, however, it does not affect system operation.
Initiator failed to connect to the target. Target IP address and TCP Port
Error
number are given in dump data.
Go to the following Microsoft website for details.
http://support.microsoft.com/kb/976072/en-us
Broadcom NetXtreme Gigabit Ethernet #xx: The network link is down.
Warning
Check to make sure the network cable is properly connected.
If the message appears upon system startup or upon applying Starter
Pack, there is no problem in system operation.
Broadcom BCM57711 #xx: The network link is down. Check to make
Warning
sure the network cable is properly connected.
If the message appears upon system startup or upon applying Starter
Pack, there is no problem in system operation.
Broadcom BCM57810 #xx: The network link is down. Check to make
Warning
sure the network cable is properly connected.
If the message appears upon system startup or upon applying Starter
Pack, there is no problem in system operation.
Express5800/E120e-M Maintenance Guide
2. List of Windows Event Logs

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/e120e-m

Table of Contents