NEC Express5800 Series Maintenance Manual page 133

Chapter 3 Appendix
Applications and Services Logs
Microsoft-Windows-Kernel-EventTracing/Admin
Microsoft-Windows-
Kernel-EventTracing
2
When running an OS for the first time
Microsoft-Windows-
Kernel-EventTracing
3
When running an OS for the first time
Microsoft-Windows-Dhcp-Client/Admin
Microsoft-Windows-
Dhcp-Client
1001
When installing an OS, running an OS
for the first time, or applying Starter Pack
Windows Server 2008
System Event Log
• For Windows Server
2008 x64: b57nd60a
• For Windows Server
2008 x32: b57nd60x
4
Upon system startup or upon applying
Starter Pack
l2nd
4
Upon system startup or upon applying
Starter Pack
l2nd
4
Upon system startup or upon applying
Starter Pack
storflt
5
Upon OS Installation
Error Session "" failed to start with the following error: 0xC000000D
This event does not affect system operation.
Session "Microsoft-Windows-Setup" stopped due to the following error:
Error
0xC000000D
This event does not affect system operation.
Your computer was not assigned an address from the network (by the
DHCP Server) for the Network Card with network address
0x50E549A98325.
Error
The following error occurred: 0x79.
Your computer will continue to try and obtain an address on its own from
the network address (DHCP) server.
If this event is logged when installing an OS, running an OS for the first
time, or while applying Starter Pack, it does not affect system operation.
Broadcom NetXtreme Gigabit Ethernet #xx: The network link is down.
Warning
Check to make sure the network cable is properly connected.
If the message appears upon system startup or upon applying Starter
Pack, there is no problem in system operation.
Broadcom BCM57711 #xx: The network link is down. Check to make
Warning
sure the network cable is properly connected.
If the message appears upon system startup or upon applying Starter
Pack, there is no problem in system operation.
Broadcom BCM57810 #xx: The network link is down. Check to make
Warning
sure the network cable is properly connected.
If the message appears upon system startup or upon applying Starter
Pack, there is no problem in system operation.
The Virtual Storage Filter Driver is disabled through the registry.
Warning
It is inactive for all disk drives.
This event does not affect system operation.
Express5800/E120e-M Maintenance Guide
2. List of Windows Event Logs
133