Remote Control Feature; How To Remotely Control; Preparation - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
9.3

Remote Control Feature

Off-line Tools can be remotely controlled from PC for Management without requiring keyboard or other consoles
to be connected.

9.3.1 How to remotely control

Control from a LAN connected PC for Management using the remote KVM of EXPRESSSCOPE Engine 3.
For details of the remote KVM, refer to "EXPRESSSCOPE Engine 3 User's Guide" in EXPRESSBUILDER.
The Console Redirection feature of BIOS enables remote control feature.

9.3.2 Preparation

Set the remote management feature of EXPRESSSCOPE Engine 3 in advance to check hardware error
information during console-less operation.
For settings information, see "EXPRESSSCOPE Engine 3 User's Guide" or NEC ESMPRO Manager online
help.
52
Note Connect the LAN cable to the connector on management LAN port. Or, if Shared BMC LAN
feature is used, connect the LAN cable to the corresponding LAN connector.
Express5800/E120e-M Maintenance Guide
9. Offline Tools