Table of Contents
Advertisement
2
I
NSTALLATION
2.2 U
NPACKING
For machines held from the rear side
– Order number for fixing bolt assembly [5A] (includ-
ing screw and cylinder pins): A7621
Tools:
– 17 mm hexagon socket driver
– 8 and 10 mm hexagon socket drivers
Locate the two cylinder pins [5B] in the holes in the
fixing bolt [5A].
Screw the fixing bolt [6B] onto the flange on the rear
side of the machine with the screw provided [6C].
– The two cylinder pins must locate into the holes
in the flange.
– Mount the fixing bolt with its bevelled side pointing
inwards towards the machine.
Tightening torque:350 Nm
,
ASSEMBLING AND CONNECTING THE MACHINE
[6A]
A
[5]
Fixing bolt (A) for clamping the machine from the rear side.
The cylinder pins (B) prevent rotation of the fixing bolt.
A
C
[6]
Mounting the fixing bolt (B).
15
ALS
104
B
B
Advertisement
Table of Contents
