Setting The Clock - Kubota KX033-4 Operator's Manual

User settings
A If you have any question, consult your local KUBOTA
Dealer.
BSetting the Clock
1. Turn the starter key to the "RUN" position.
(1) Starter switch
2. Press the switch 1 to make the log record/periodic
check/clock set screen appear.
(1) Switch 1
(2) Switch 5
(3) Cursor
(A) STOP
(B) RUN
(C) START
(4) Switch 2 and 3
(5) Switch 4
CHECKS BEFORE START
3. Press the switch 2 twice to move the cursor into
position. Then press the save switch 5 to make the
following screen appear. By pressing the switch 4, the
year, month, day, hour and minute will be selected in
this order. Select an item to readjust.
(1) Switch 5
(2) Switch 2
Press the switch (Switch 2) and the numeric setting will
be smaller.
Press the switch (Switch 3) and the numeric setting will
be larger.
Hold down the or switch, and the numeric setting will
change quickly.
Press the switch (Switch 4), and the year, month, day,
hour and minute will be selected in this order.
4. Save the new setting with the
Press this switch 5 again to set the clock.
(1) Switch 5
13
(3) Switch 3
(4) Switch 4
switch (Switch 5).