Replacing Fuel Filter Cartridge; Replacing Hydraulic Return Filter Element(First Replacement After 250 Service Hours) - Kubota Super Series 2 KX 91-3 Operator's Manual

56 REGULAR CHECKS AND MAINTENANCE WORK
BReplacing Fuel Filter Cartridge
To avoid personal injury:
A Keep fire away.
1. Remove the filter with the supplied filter wrench.
2. Add fuel to a new filter before installing.
3. Apply a light film of fuel to the seal of the new filter and
turn in tightly by hand.
4. Open the cock of the fuel filter again.
(1) Fuel filter cartridge
A After exchange of the filter, the fuel system must be
purged of air.
BReplacing Hydraulic Return Filter
Element(first replacement after 250
service hours)
To avoid personal injury:
A Remove the oil filter only after the oil in the
hydraulic tank has cooled down.
(1) Set bolt
(2) Filter support
1. Remove the cover of the hydraulic tank.
2. Pull out the filter support by the top plate from the
hydraulic tank.
3. Remove the return filter from the filter support with a
fork wrench and exchange the filter.
A Always check the oil level when replacing the filter.
(3) Return filter
(4) Cover