Programming the CCDACT
Programming
With the DACT Programmer screen displaying
program the CCDACT as follows:
Note:
Time and date must be reentered any time that power is removed
from the CCDACT.
1.
Press [↵] or [↓]. Screen displays:
Type in the current time.
2.
Press [↵] or [↓]. Screen displays:
Type in today's date.
Note:
The CCDACT must be programmed with an account number and
a working Central Station telephone number for proper operation.
3.
Press [↵] or [↓]. Screen displays:
Type in Phone #1's number (18 digits maximum).
Note:
Phone numbers 1 or 2 may require the following special characters:
•
"B" = Use in lieu of "∗" (DTMF only)
•
"C" = Use in lieu of "#" (DTMF only)
•
"D" = Enters 3-second delay
•
"E" = Enters "wait for dial tone" command
4.
Press [↵] or [↓]. Screen displays:
Type in Phone #2's number (18 digits maximum).
5.
Press [↵] or [↓]. Screen displays:
Scroll to the desired format.
3-4
firealarmresources.com
00>DACT PROGRAMMER
[REVISION X.XX.XX]
01>TIME (24 HOUR)
[00:00]
02>DATE
[1/1/96]
03>PHONE #1
[
]
04>PHONE #2
[
]
05>COMM FORMAT #1
[4/2]
Continued on next page
,