Simplex Contact Closure DACT Installation And Programming Instructions page 38

Programming the CCDACT,
Programming (Continued)
Continued
10. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
11. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
12. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
13. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
14. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
15. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
16. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
3-8
firealarmresources.com
10>ST PRIORITY2
[P1 ELSE P2]
11>ST SUPERVISORY
[P1 ELSE P2]
12>ST TROUBLE
[P1 ELSE P2]
13>ST ALARM RESTORE
[P1 ELSE P2]
14>ST PRI2 RESTORE
[P1 ELSE P2]
15>ST SUPERV RESTORE
[P1 ELSE P2]
16>ST TRBL RESTORE
[P1 ELSE P2]
Continued on next page