Table of Contents
Advertisement
SET-UP CONT'D
4. Attach the Universal Power Cord to the
PULSE HEAT Outputs as shown.
5. Attach the proper tip for the task at hand, to
the selected handpiece. Refer to the Pulse
Heat Reference Guidelines for recommended
tip/handpiece selection and PULSE HEAT
Output Control settings.
6. Attach selected handpiece to the Universal
Power Cord as shown.
7. Insure that the PULSE HEAT Output Control
is adjusted to "0".
98
Universal Power Cord
Figure 125. Universal Power Cord
Figure 126. Handpiece Attachment
Advertisement
Table of Contents
