4. Release the TIP SET and the °F/°C Keys. The Digital
Readout will now display "P - -" signifying that the
system is now asking for the operator to enter the
Password previously installed into the system's
memory.
If "PS-" is displayed on the Digital Readout instead of "P - -", a Password
has not been previously installed. Refer to the "INSTALLING A PASS-
WORD" section of this manual.
5. Press the first key of the Password.
6. Press the second key of the Password.
Figure 59. Stored Password
NOTE
Figure 60. First Key Not Tip Set Key
55