Table of Contents
Advertisement
b) Press the Scroll Up Key.
c) Release both keys.
OPERATION
1. Temperature Setback for each channel is indicated by the following.
a) The Current Channel LED will flash off once each 2 second period when that channel is in
Temperature Setback Mode.
b) Any Active, non-Current Channel LED will flash on once each 2 second period when that
channel is in Automatic Temperature Setback Mode.
2. Any Inactive Channel will not enter Temperature Setback Mode.
3. Any Active Channel whose Set Tip Temperature is less than 180°C (350°F) will enter
Temperature Setback Mode but will remain at its original Set Tip Temperature.
EXITING AUTOMATIC TEMPERATURE SETBACK MODE
Figure 92. Temp. Setback Entry
69
Advertisement
Table of Contents
