Viscosity - Volvo Penta D5 Operator's Manual

Technical Data
Lubrication System
Engine
Oil capacity including oil filters, approx.:
No engine inclination
Oil pressure, hot engine:
Oil pressure during neutral
at operating speed 1100 r/min
(1)
Oil quality
VDS-3
(4)
VDS-2
(3)
ACEA: E7, E5, E3
API: CI-4, CH-4
1)
Lowest recommended oil grade. Engine oil with higher oil grade is always possible to use.
2)
If sulphur content is > 1.0% by weight, use oil with TBN > 15.
3)
API: CG-4 or CH-4 are acceptable in markets outside Europe, instead of ACEA E3.
(4)
The oil must also comply with at least one of the following specifications: ACEA:E7, ACEA:E5, Global DHD-1,
API:CI-4, API:CH-4.
VDS = Volvo Drain Specification
ACEA = Association des Constructeurs Européenne d'Automobiles
API = American Petroleum Institute
Global DHD = Global Diesel Heavy Duty
TBN = Total Base Number
68
D5
14 liters
80 kPa
450 kPa
Sulfur content in fuel, by weight
<0,5 %
Oil change interval, reached first in operation:
500 hours or 12 months
D7
23 liters
80 kPa
450 kPa
0,5 – 1,0 %
250 hours or 12 months

Viscosity

Select the viscosity according to the table.
The temperature values refer to stable ambient
temperatures.
47713336 03-2021 © AB VOLVO PENTA
(2)
> 1,0 %
125 hours or 12 months