Lubrication System; Viscosity - Volvo Penta TAD550GE Operator's Manual

Technical Data
Oil Change Volume
incl. filter change
Oil Sump
Oil temperature
operating, max
Oil Pressure
at rated engine rpm
Oil filter
Full flow filter
Lube oil pump
Type
Oil recommendations
Engine
TAD550–51GE
TAD750–754GE
NOTICE! Mineral based oil, either fully or semi-synthetic, may be used on condition that it complies with the quality
standards above.
1)
If sulfur content is >1.0 % by weight, oil with TBN >15 must be used.
2)
API: CG-4 or CH-4, is acceptable in markets outside Europe, instead of ACEA E3.
VDS = Volvo Drain Specification
ACEA = Association des Constructeurs Européenne d'Automobiles
API = American Petroleum Institute Global
TBN = Total Base Number
76
TAD550–51GE
13 l (3.4 US gal)
max. 11 l (2.9 US gal)
min. 7 l (1.8 US gal)
125 °C (257 °F)
300–500 kPa (44–73 psi)
1 pc. (tighten 1/2–3/4 turn after it touches)
Gear driven
Oil grade
VDS-3
VDS-2
(2)
ACEA:E7, E5, E3
API:CI-4, CH-4
VDS-3
VDS-2
(2)
ACEA:E7, E5, E3
API:CI-4, CH-4

Lubrication System

TAD750–51GE
23 l (6.1 US gal)
max. 20 l (5.3 US gal)
min. 16 l (4.2 US gal
Sulfur content in fuel, by weight
up to 0,5 % 0,5 – 1,0 %
Oil change interval: Reached first in operation
250 h / 12 months 125 h / 12 months 62 h / 12 months
500 h / 12 months 250 h / 12 months 125 h / 12 months

Viscosity

Select the viscosity according to the table.
The temperature values refer to stable ambient
temperatures.
* SAE 5W/30 refers to synthetic or semi-synthetic oils.
47711096 09-2018 © AB VOLVO PENTA
TAD752–54GE
34 l (8.9 US gal)
31 l (8.1 US gal)
25 l (6.5 US gal)
1)
more than1,0 %