Lubrication System; Oil Grade And Oil Change Interval; Viscosity - Volvo Penta TAD560VE Operator's Manual

Oil change volume, including filter change
Oil pan, standard
Oil Pressure
Engine oil operating temperature, min. 120 °C (248 °F)
At rated engine rpm
Automatic stop at pressure lower than
Oil filter
Full flow filter
Lube oil pump
Type
Oil recommendations
Oil quality
VDS-3
IMPORTANT:
Installations with Start/Stop function, only Volvo hybrid oil 15W-50 is allowed.
NOTICE! Sulfur content in fuel must not exceed 15 ppm.
NOTICE! Mineral-based oil, either fully or semi-synthetic, can be used on condition that it complies with the quality
requirements above.
VDS = Volvo Drain Specification
47711097 09-2018 © AB VOLVO PENTA

Lubrication System

29 l (7.7 US gals)
420–450 kPa (61–65 PSI)
100 kPa (15 PSI)
1 pc. (tighten 1/2–3/4 turn after it touches)
Gear driven

Oil Grade and Oil Change Interval

Oil change interval, reached first in operation:
600 hours or 12 months

Viscosity

Select the viscosity according to the table.
The temperature values refer to stable ambient
temperatures.
* SAE 5W/30 refers to synthetic or semi-synthetic oils.
Technical Data
93