2. Set the parameters.
Table 5-7
Table 5-7 QoS Traffic Shaping parameters
Parameter
On/Off
Name
Interface
Rate
3. Click Apply button to apply the changes.
5.4 Configure the Security
5.4.1 Configure the Firewall Level
The section describes how to configure firewall level.
Steps
Configure the Firewall
1. On the main page of the ZXHN H3600, select Internet > Security > Firewall to the
Firewall page, see
Figure 5-14 Firewall Page
2. Set the parameters. For a description of the parameters, refer to
SJ-20201203151144-003 | 2021-06-16(R1.0)
lists the QoS traffic shaping parameters.
Figure
5-14.
Description
Click On to enable the traffic shaping function.
Click Off to disable the traffic shaping function.
New QoS traffic shaping name.
Select an interface from the drop-down list.
Committed access rate. Range: 0,8192 – 1000000000.
The shaping rate value of 0 indicates no speed limit.
5 Configure the Internet
Table
5-8.
31