Configure The Qos Traffic Shaping - Zte ZXHN H3600 Maintenance Management Manual

ZXHN H3600 Maintenance Management Guide
Parameter
2. Click Apply button to apply the changes.
Each interface can be configured up to 8 queues. When the queues of interface

are emptied, scheduling policies will be removed.
Under the same interface, if a queue's algorithm is SP, its priority must not be

used by other queues.
There is a default queue in every interface. If not specified, the first queue will

work as the default queue, otherwise, the last setting queue will be the default
queue. Note that the default queue will automatically enabled and can not be dis-
abled.
"Traffic Classes" is used to bind classification to a queue. Use "," to join num-

bers when binding several classifications, e.g. "1,2,10". Please note that different
queues in an interface cannot bind the same classification.

5.3.4 Configure the QoS Traffic Shaping

The procedure provides the parameters of QoS traffic shaping configuration features.
Steps
1. On the main page of the ZXHN H3600, select Internet > QoS > Traffic Shaping to
open the Traffic Shaping page, see
Figure 5-13 Traffic Shaping
30
Description
Traffic Classes is used to bind classification to a queue. Use "," to join
numbers when binding several classifications, e.g. "1,2,10". Please note
that different queues in an interface cannot bind the same classification.
Note
Figure 5-13.
SJ-20201203151144-003 | 2021-06-16(R1.0)