Configure The Sip Protocol - Zte ZXHN H3600 Maintenance Management Manual

ZXHN H3600 Maintenance Management Guide
Table 7-3 Parameter Descriptions for the Echo Cancellation
Parameter
Echo Cancellation
3. Click Apply button to apply the changes.

7.4 Configure the SIP Protocol

This procedure describes how to configure the SIP Protocol.
Steps
1. On the main page of the ZXHN H3600 device, select VoIP > SIP Protocol to the SIP
Protocol page, see
Figure 7-5 SIP Protocol Page
2. Set the parameters.
Table 7-4 Description of the SIP Protocol Parameters
Parameter
Local Port
Primary Proxy Server
Primary Outbound Proxy
Server
76
Description
Whether to disable the echo cancellation feature.
Figure 7-5.
Table 7-4 describes the SIP protocol parameters.
Description
Local port that the SIP protocol uses, default: 5060.
IP address of the active SIP proxy server that the ISP provides, which
must be the same as that configured on the SIP server.
IP address of the active outbound proxy server that the ISP provides,
which must be the same as that configured on the SIP server.
SJ-20201203151144-003 | 2021-06-16(R1.0)