Login - Zte ZXHN H3600 Maintenance Management Manual

ZXHN H3600 Maintenance Management Guide
3. Double-click Internet Protocol (TCP/IP). The Internet Protocol (TCP/IP) Proper-
ties dialog box is displayed. Set the IP address to 192.168.1.200, subnet mask to
255.255.255.0, and default gateway to 192.168.1.1.
4. Click OK.
Postrequisite
After the IP address of the computer is set, you can run the Ping command to ping the
IP address 192.168.1.1. If the ping operation is successful, it indicates that the TCP/IP
configuration is correct and the computer is properly connected to the ZXHN H3600.

3.2 Login

The ZXHN H3600 provides a Web-based configuration and management system. You
can enter a specified IP address in the address bar of Internet explorer to access the
system.
Prerequisite
A computer is directly connected to the LAN port of ZXHN H3600, and their IP address-
es are in the same network segment.
Steps
1. Open Internet explorer, and enter http://192.168.1.1 (default maintenance IP address
of the ZXHN H3600) in the address field. Press the Enter key. The login page is dis-
played, see
Figure 3-1 Login Page
14
Figure 3-1.
SJ-20201203151144-003 | 2021-06-16(R1.0)