Configure The Sip Accounts; Configure The Advanced Parameters - Zte ZXHN H3600 Maintenance Management Manual

ZXHN H3600 Maintenance Management Guide

7.2 Configure the SIP Accounts

This procedure describes how to configure basic parameters of the
ing sip account, authorization username, password.
Steps
1. On the main page of the ZXHN H3600 device, select VoIP > Basic to open the SIP
Accounts page, see
Figure 7-2 SIP Accounts Page
2. Set the parameters.
Table 7-1 Description of the SIP Account Parameters
Parameter
SIP Account
Authorization User-
name
Password
3. Click Apply button to apply the changes.

7.3 Configure the Advanced Parameters

This procedure describes how to configure advanced parameters of the VoIP service, in-
cluding echo cancellation, jitter buffer, and DTMF.
Steps
Configure the Advanced Parameters.
1. On the main page of the ZXHN H3600 device, select VoIP > Advanced. The Ad-
vanced page is displayed, see
74
Figure 7-2.
Table 7-1 describes the SIP account parameters .
Description
Registered name of a SIP subscriber. Normally, it is the phone number
of the subscriber.
Username for authentication by the SS system, which must be the same
as that configured in the SS system.
Password for VoIP service authentication by the SS system, which must
be the same as that configured in the SS system.
Figure 7-3.
SJ-20201203151144-003 | 2021-06-16(R1.0)
VoIP service, includ-