Configure The Media - Zte ZXHN H3600 Maintenance Management Manual

Parameter
Primary Proxy Port
Secondary Proxy Server
Secondary Outbound
Proxy Server
Secondary Proxy Port
Register Expires
Unregister On Reboot
Link Test
Link Test Interval
3. Click Apply button to apply the changes.

7.5 Configure the Media

This procedure describes how to configure the media codec type.
Steps
1. On the main page of the ZXHN H3600 device, select VoIP > Media to the Media
page, see
Figure 7-6 Media Page
2. Configure the media parameters.
SJ-20201203151144-003 | 2021-06-16(R1.0)
Description
Port number that the ISP provides for communication between the ac-
tive server and VoIP terminals, which must be the same as that con-
figured on the SIP server, default: 5060.
IP address of the standby SIP proxy server that the ISP provides,
which must be the same as that configured on the SIP server.
IP address of the standby outbound proxy server that the ISP pro-
vides, which must be the same as that configured on the SIP server.
Port number that the ISP provides for communication between the
standby server and VoIP terminals, which must be the same as that
configured on the SIP server, default: 5060.
Registered lifecycle, unit: seconds, default: 3600.
Whether to deregister VoIP terminals after the server is restarted.
Whether to enable link tests.
Interval of link tests, default: 20 seconds.
Figure 7-6.
Table 7-5 describes the media parameters.
7 Configure the VoIP
77