Configure The Ftp - Zte ZXHN H3600 Maintenance Management Manual

Parameter
Source Port
Destination Port
Source MAC Address
3. Click Apply button to apply the changes.

6.5 Configure the FTP

The section describes how to configure FTP. FTP provides the parameters of FTP con-
figuration features.
Prerequisite
Before configuring FTP application, make sure a USB storage device is connected to
open the ZXHN H3600 device.
Steps
1. On the main page of the ZXHN H3600, select Local Network > FTP to open the
FTP page, see
Figure 6-23 FTP
2. Table 6-16
Table 6-16 FTP parameters
Parameter
Server
Username/Password
3. Click Apply button to apply the changes.
SJ-20201203151144-003 | 2021-06-16(R1.0)
Figure 6-23.
lists the FTP parameters.
Description
Source port number of the matching packets.
Destination port number of the matching packets.
MAC address of the source device that sends the
matching packets.
Description
Click On to enable the FTP server function.
Click Off to disable the FTP server function.
It is valid only if the FTP security function is enabled.
6 Configure the Local Network
67