ZXHN H168N Maintenance Management Manual
6.5 Configuring FTP
The section describes how to configurate FTP. FTP provides the parameters of
configuration features.
Prerequisite
Before configuring
ZXHN H168N device.
Steps
1. On the main page of the ZXHN H168N, select Local Network > FTP to go to the FTP
page.
The page as shown in
Figure 6-24 FTP
2. Select On to enable FTP Server, and specify other parameters.
3. Click Apply button to apply the changes.
– End of Steps –
6.6 UPnP
This page provides the parameters of
Steps
1. On the main page of the ZXHN H168N, select Local Network > UPnP to go to the
UPnP page.
The page as shown in
SJ-20140220172310-002|2014-03-03 (R1.0)
FTP
application, make sure a
Figure
6-24.
UPnP
Figure
6-25.
6-22
USB
storage device is connected to the
configuration features.
ZTE Proprietary and Confidential
FTP