Page 2
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respe- ctive owners. This document is provided “as is”, and all express, implied, or statutory...
Safety Precautions Note Before using the device, read the following safety precautions. ZTE bears no liabili- ty to the consequences incurred by violation of the safety instructions. Usage Cautions Read all the safety cautions carefully before using the device.
EU Declaration of Conformity Hereby, ZTE Corporation declares that the radio equipment type ZXHN H3601P is in compliance with Directive 2014/53/EU, The full text of the EU declaration of con- formity is available at the following Internet address: http://support.zte.com.cn/support/cer/EU...
You may also contact your equipment provider for more information on the environmental performances of these prod- ucts. Package Check Please ensure the ZXHN H3601P package contains the following items. Name Quantity ZXHN H3601P...
5250 MHz– 5350 MHz Wi-Fi 5 GHz band: EIRP: (29±1) dBm 5470 MHz– 5725 MHz Note Please use the power adapter provided by the manufacturer. Hardware Description Front panel Figure 4-1 shows the indicators on the front panel of the ZXHN H3601P.
Page 7
The power supply is not connected. The power supply is faulty. The indicator is disabled by the software. Steady on Options: ZXHN H3601P is being started. ZXHN H3601P is abnormal. Flashing Options: Uplink connection failed. Configuration synchronization failed in extender mode.
Flashing In extender mode, the wireless uplink signal is weak. Green+Red Flashing ZXHN H3601P is upgrading software. +Blue Rear panel Figure 4-2 shows the interfaces and buttons on the rear panel of the ZXHN H3601P Figure 4-2 The Rear Panel...
RJ-45 port: Used to connect to the uplink access network. Power Power supply socket: Used to connect to the power adapter. Hardware Connection Figure 5-1 shows the devices that are connected to interfaces of the ZXHN H3601P. Figure 5-1 Cable Connection...
Verify that the cable connections are correct, and press the on/off button. After the power indicator is lit and other indicators operate properly, services of the carrier can be used. The factors affecting the wireless network coverage range include the location of the product, distance between the product and a wireless terminal, number of ob- stacles, obstacle material and density, and interference source.
Page 11
Restore the factory default settings. After the power is on, use a needle to press the button for over 5 seconds to re- store the default factory settings.
Need help?
Do you have a question about the ZXHN H3601P and is the answer not in the manual?
Questions and answers
Can't connect via wireless