Steps
1. On the navigation tree, click [Application→ QoS→ Basic].
configuration page is displayed, see
Figure 50 Basic QoS Parameters
2. Select Enable QoS to enable the QoS function, and then specify other parameters.
3. Click Submit.
8.7.2 Configuring QoS Classification
This procedure introduces how to configure the QoS classification rules, including layer-2 protocol,
IP address range, and MAC address range.
Prerequisite
Before configuring QoS classification, make sure that the basic
Context
QoS is a network security mechanism that handles network transmission delay and congestion.
Steps
1. On the navigation tree, click [Application→ QoS→ Classification]. The QoS classification
configuration page is displayed, see
Figure
50.
Figure
51.
69
The basic QoS parameter
QoS
configuration is completed.