Wolverine Assembly Configuration Code - Graco Wolverine A261 Series Instructions-Parts List Manual

Models and Approvals
Configuration Number Matrix
Check the identification plate (ID) for the 12-digit Configuration Number of your pump. Use the following matrix to define the com-
ponents of your pump.
Model Number
Date Code
F . 1 Example of the Wolverine Assembly Identification Plate
IG

Wolverine Assembly Configuration Code

Sample Configuration Number: CI-12S-3XD-3XD-C
CI 12
Chemical Injection Voltage Motor
Voltage Motor
12 12 VDC S Small
24 24 VDC L Large
1A 115 VAC H Hazardous Location
CID1
2A 230 VAC B Continuous Injection
Variable Speed,
Brushless C1D2
3A 115/230 D Variable Speed, AC
VAC
4A 230/460 X ATEX
VAC, 3
Phase
5A 230/400
VAC, 3
Phase
NOTE: Effective Date Code "X 2516" (see F
tion. See manual 334513, rev C.
NOTE: Not all combinations are possible.
NOTE: Approvals information is found on pages 3 and 4. Models can be identified using the Voltage and Motor configuration codes and columns.
NOTE: Variable speed AC motor configurations are not rated for continuous duty applications.
8
A29150 CI-12S-3XD-3XD-C
# ####
Graco Inc., P.O. Box 1441
Mpls, MN 55440 USA
Side 1
S 3 X
Plunger Size Plunger Coating Seal Material Plunger Size
Side 1
Plunger Plunger
Size Coating
1 3/16" C Ceramic
2 1/4" X Chromex
3 3/8"
5 1/2"
6 5/8"
7 3/4"
. 1), if your configuration does not match this format, you have an older pump assembly configura-
IG
########
1500 ( 10.3 ) 1500 ( 10.3 )
A
D 3
Seal Plunger
Material Size
A FKM 0 None
(Simplex)
B FKMETP 1 3/16"
C HNBR 2 1/4"
D FFKM 3 3/8"
E TFE/P 5 1/2"
7 5/8"
B None
Configuration Number
Side 2
X
Plunger Coating Seal Material
Side 2
Plunger Seal
Coating Material
0 None 0 None
(Simplex) (Simplex)
C Ceramic A FKM
X Chromex B FKMETP
C HNBR
D FFKM
E TFE/P
D C
Qualifier
Qualifier
0 None
C Cycle
Count
334513N