Table of Contents
Advertisement
Key Points
Motors
•
DC motors are available in a small or large frame
size.
•
Small DC motors run more efficiently for low to
medium pressure applications.
•
Large DC and AC motors have a higher torque out-
put for medium to high pressure applications.
•
AC motors are available as medium or large.
Wolverine Advanced
•
Advanced pumps are higher-quality, modular, and
more easily serviceable pumps available in numer-
ous configurations.
•
Advanced configurations are available with one or
two pumps and all voltages.
•
Advanced configurations come standard with Chro-
mex-coated stainless steel plungers for longer
plunger and packing life, as well as, better corrosion
resistance.
•
Advanced configurations are available with a cycle
counter factory-installed to allow the pump to oper-
ate in cycle mode with the Harrier and Harrier+
Chemical Injection Controllers.
334513N
Wolverine Hazardous Location (C1 D1)
•
Hazardous Location are large motors, and available
as 12 VDC, 24 VDC, 115/230 VAC 1 Phase, and
230/460 VAC 3 Phase.
Wolverine ATEX
•
Explosive Atmosphere Zone 1 motors are all large
motors, and available as 24 VDC, 230 VAC, and
230/400 VAC 3 Phase
Wolverine Continuous Injection Variable
Speed (12 VDC and 24 VDC) (C1 D2)
•
Continuous injection motors are large motors that
do not require a controller for operation. They fea-
ture an integral variable speed controller and are
adjustable from 0-67 cpm.
Models and Approvals
11
Advertisement
Table of Contents
