Pump Assembly - Graco RoadLazer HPS 135 Severe Duty Operation And Parts

Pump Assembly

Pump Assembly
NOTICE
Use the 3 lift rings (eyebolts), attached to the
mounting plate, for lifting and moving the motor into
place for installation. Moving the motor by any other
means could damage the pump assembly.
1. Assemble Coupling Adapter (H) to the Motor (F).
2. Assemble Tie Rod with Extension (L) to the Motor
(F).
3. Assemble Displacement Pump (G) to Tie Rod with
Extension (L) and hand-tighten the Hex Nuts (N).
4. Assemble Coupling Collars (K) and Coupling Nut (J)
to Coupling Adapter (H).
5. Assemble Hex Nuts (N) to Tie Rod with Extension
(L).
6 3A9247A