拆卸步骤 Disassembly Procedure - Galanz XQG60-A708E After-Sales Service Manual

9.2 拆卸步骤 Disassembly Procedure
以 XQG60-A712DE 为例。
Take XQG60-A712DE for example.
Disassembly procedure
拆卸工序
拆除顶盖板和后盖板
Remove top cover as and back cover
拆除面板组件
Remove control panel as
XYJGT6070AQFDE-001
简要说明
Brief
description
1.用十字批拆除固定
顶盖板螺钉 1、2
Remove the screws
1 and 2 fixing the
top cover as with a
cross screwdriver.
2.用手把顶盖板往后
推，同时取出顶盖板
Push back the top
cover plate by hand
and take out the top
cover as.
3.用十字批拆除后盖
板五个螺钉 3、4、5、
6、7
Remove five screws
3, 4, 5, 6 and 7 of
the back cover with
a cross screwdriver.
注意事项
Matters needing
attention
1.拆出的顶盖板和后
盖板做好防刮花保
护
The top cover as
and back cover
plates removed
shall be protected
against scratching.
2.在拆除所有螺钉时
注意力度，以免刮花
箱体
Pay attention to the
strength when
removing all screws
to avoid scratching
the cabinet.
40