拆卸步骤 Disassembly Procedure - Galanz XQG90-T514VE Service Manual

剪钳或剪刀
Diagonal cutters
5
Scissors
平口钳
6
Combination pliers
防静电手套
7
Antistatic gloves
手套
8
Gloves
注：1.拆卸钣金件时，请佩戴手套，做好防护，以免受伤。
2.所有部件在组装时，请按原始装配情况装配。
Note:
1. When removing sheet metal parts, please wear gloves and protect them to avoid injury.
2. When assembling all parts, please assemble them according to the original condition.
9.2 拆卸步骤 Disassembly Procedure
以 XQG90-T514VE 为拆卸模型
Take XQG90-T514VE as the disassembly model
Disassembly procedure
or
拆卸工序
拆除顶盖板和后盖板
emove top cover as and back cover
R
XYJGT90100TVE-001
或 or
简要说明
Brief description
注意事项
Matters needing
attention
35