Galanz XQG60-A708E After-Sales Service Manual page 47

拆除进水斗组件
Remove the inlet housing
XYJGT6070AQFDE-001
1.拔出进水阀组件两
个接线端子 1、2
Pull out the two
terminals 1 and 2 of
the water valve.
2.用十字批拆除箱体
背面两个螺钉 3、4，
取出进水阀组件
Remove the two
screws 3 and 4 on
the back of the
water valve with a
cross screwdriver,
and take out the
water valve.
1.注意原机器上的进
水阀接线端子 1、2
的顺序，重装时不要
接反
Pay attention to the
sequence of water
valve terminals
1and 2 on the
original machine,
and do not connect
them reversely
when reassembling,
2.注意拆 3、4 位置
的螺钉时不要刮花
箱体
Pay attention not to
scratch the cabinet
when removing the
screws at positions
3 and 4.
46