Galanz XQG60-A708E After-Sales Service Manual page 54

拆除滤波器和电源线
Remove filter and power cord
XYJGT6070AQFDE-001
1.用十字批拆除固定
排水泵的四个螺钉
1、2、3、4
Remove the four
screws 1, 2, 3 and 4
holding the drain
pump with a cross
screwdriver.
2.用平口钳夹紧排水
管管夹同时用力拔出
排水管
Clamp the pipe
clamp with flat jaw
pliers and pull out
the drainage pipe
with force at the
same time.
1.安装排水泵螺钉时
请注意不能滑牙或
漏装，避免产生噪音
When installing the
screw of the pump,
please pay attention
not to slip or miss,
so as to avoid
noise.
2.拆出的排水泵做好
防护
Protect the
removed pump.
53