Galanz XQG60-A708E After-Sales Service Manual page 56

用 10 号套筒及电批
把固定发热管螺母 1
拆除，把发热管组件
取出
Remove the nut 1 of
the heater with
No.10 sleeve and
electric driver, and
then take out the
heater.
拆除电机组件
Remove the motor
1.取出皮带
Remove the belt.
2.用 10 号外六角套
筒及电批把固定电机
的两个螺钉 1、2 和
橡胶套拆除
Remove the two
screws 1, 2 and
rubber sleeve fixing
the motor with
No.10 outer
hexagon sleeve and
electric driver.
3.往上提，双手把电
机取出放好
Lift the motor up
with both hands and
put it in place.
拆除下配重块
XYJGT6070AQFDE-001
拆 出 的 发 热 管 组 件
要做好防护措施
Protect the
removed the heater.
1.拿取电机时请勿提
线，避免线断
Do not lift the wire
when taking the
motor to avoid wire
breakage.
2.拆出的皮带和电机
组件做好防护措施
Remove the belt
and motor should
be protected.
55