Remove lower balancer
拆除皮带轮
Remove the pulley
拆除减震器销(外桶)
Remove absorber pin (Tub)
XYJGT6070AQFDE-001
用 13 号外六角套筒
配合电批拆除下配重
块 3 颗螺钉 1、2、3
Remove the lower
balancer screws 1, 2
and 3 with No.13
outer hexagon
sleeve and electric
driver.
用 16 号外六角套筒
配合电批拆除皮带轮
螺钉,取下皮带轮
Remove the pulley
screws with No.16
outer hexagon
sleeve and electric
driver.
拆出的配重块要轻
拿轻放,避免损坏
The removed
balancer should be
handled with care to
avoid damage.
拆出的皮带轮做好
防护措施
Remove the pulley
should be
protected.
56