Sim Card Wafer Connector (Cn7); Hd Audio Interface Wafer Connector (Cn8); Inverter Connector (Cn9) - AXIOMTEK CAPA55R User Manual

CAPA55R Capa Board
2.6.6

SIM Card Wafer Connector (CN7)

The CN7 is a 6-pin (pitch=1.0mm) wafer connector, which is compliant with JST
B6B-PH-K-S, for SIM Card interface. You are suggested to use AX93A19 for CN7 to
have SIM card slot.
In order to work properly, the SIM card must be used together with 3G/4G/5G module in
M.2 Key B connector (SCN2). It is mainly used in 3G/4G/5G cellular network application.
Pin Signal
1 SIM_PWR
2 SIM_RESET
3 SIM_CLK
4 SIM_DAT
5 VPP
6 GND
2.6.7

HD Audio Interface Wafer Connector (CN8)

This is an 8-pin (pitch=1.0mm) wafer connector, which is compliant with JST
BM08B-SRSS-TB, for HD audio interface.
It is suggested to connect AX93A22 to have Mic in/Line in and Line out.
Pin Signal
1 +5V_SBY
2 HD_BIT_CLK
3 HD_DATA_IN
4 HD_DATA_OUT
5 HD_SYNC
6 HD_RST#
7 SLP_S3#
8 GND
2.6.8

Inverter Connector (CN9)

This is an 8-pin (pitch=1.25mm) connector fully compliant with Hirose DF13-8P-1.25V
for inverter. We strongly recommend you to use the matching connector,
DF13-8S-1.25C, in order to avoid malfunction.
Pin Signal
1 VBL1 (+12V level)
2 VBL1 (+12V level)
3 VBL2 (+5V level)
4 VBL_ENABLE
5 GND
6 GND
7 GND
8 VBL Brightness Control
22
6
1
1
8
8 1
Board and Pin Assignments