Product Design; Incoming Acceptance And Product; Identification; Incoming Acceptance - Endress+Hauser Liquiphant FTL64 Operating Instructions Manual

Incoming acceptance and product identification
8
3.1

Product design

 1 Product design
1 Housing with electronic insert and cover, Bluetooth module or LED module are optional
2 Temperature spacer with gas-tight welded glass feedthrough → 2 lengths available depending on the process
temperature
3 Process connection (flange or thread)
4 Probe design with compact version
5 Probe design with pipe extension
Identify the electronic insert via the order code on the nameplate.
4

Incoming acceptance and product

identification

4.1

Incoming acceptance

Check the following during goods acceptance:
 Are the order codes on the delivery note and the product sticker identical?
 Are the goods undamaged?
 Do the nameplate data match the ordering information on the delivery note?
 If required (see nameplate): Are the Safety Instructions, e. g. XA, provided?
 Is the device properly secured?
If one of these conditions is not met, please contact the manufacturer' s sales office.
1
2
3
4
Liquiphant FTL64
3
5
Endress+Hauser
A0042420