Maintenance And Cleaning; Accessories - IKA HABITAT Manual

Hide thumbs Also See for HABITAT:
Table of Contents

Advertisement

Maintenance and cleaning

/// Maintenance Checklist
Component
Check
Vessel
Visual inspection
Hoses (gas & liquids)
Visual inspection
Electrical connection
(Motor, Heating jacket,
Visual inspection
Sensors...)
Sealings, O-Rings (con-
nectors and stirrer shaft
Visual inspection
coupling)
Filter
Visual inspection
Other components made
of glass
Visual inspection
pH- and DO- probes
Visual inspection
Calibration
Foam- and Level- Probes
Adjust sensitivity
.....
82
Before
Note
use
Don't use if there are any visible cracks or
damages
X
Replace if necessary
› Don't use if there are any visible cracks or
X
damages
› Replace if necessary
Don't use if there are any visible cracks or
X
damages
Replace if necessary
Don't use if there are any visible cracks or
damages
X
Replace if necessary
Don't use if there are any visible cracks or
damages
X
Replace if necessary
Don't use if there are any visible cracks or
X
damages
Replace if necessary
Don't use if there are any visible cracks or
damages
X
Replace if necessary
Refer to software, use calibration guide
X
/// Cleaning
› For cleaning disconnect the mains plug!
› Use only cleaning agents which have been approved by IKA to clean IKA devices:
Water containing surfactant / isopropyl alcohol.
› Wear protective gloves during cleaning the devices.
› Electrical devices may not be placed in the cleansing agent for the purpose of cleaning.
› Do not allow moisture to get into the device when cleaning.
› Before using another than the recommended method for cleaning or decontamination, the
user must ascertain with IKA that this method does not destroy the device.
› For parts in contact with media, please take them for the autoclaving after the cleaning!
/// Spare parts order
› When ordering spare parts, please give:
- device type.
- serial number, see type plate.
- position number and description of spare part, see www.ika.com.
- software version.
/// Repair
› Please only send devices in for repair that have been cleaned and are free of materials which
might present health hazards.
› For repair, please request the "Safety Declaration (Decontamination Certificate)" from
IKA or use the download printout of it from IKA website at www.ika.com.
› If your appliance requires repair, return it in its original packaging. Storage packaging is not
sufficient when sending the device - also use appropriate transport packaging.

Accessories

› Foraccessories see www.ika.com.
83

Advertisement

Table of Contents
loading

Table of Contents