Maintenance And Cleaning - IKA ICC basic Operating Instructions Manual

USB cable A - Micro B 2.0:
This cable is required to connect USB port (11) to a PC�
USB micro B
Fig. 8
Device software update
Keep your device up-to-date with the IKA Firmware update tool�
The firmware update can be done with a computer connected through USB-Interface or RS 232 interface�
For this, you need register on our website MyIKA first�
After registering your device IKA will inform you about available updates for your devices�
Please download the software "FWUToolSetup�zip" from our IKA service website www.ika.com�
The device is maintenance-free� It is only subject to the
natural wear and tear of components and their statistical
failure rate�
Cleaning:
For cleaning disconnect the mains
plug!
Use only cleaning agents which have been approved by IKA
to clean the devices:
These are: water (containing surfactant) and isopropyl alcohol�
- Wear protective gloves while cleaning the device�
- Electrical devices may not be placed in the cleansing agent
for the purpose of cleaning�
- Do not allow moisture to get into the device when cleaning�
- Before using another than the recommended method
for cleaning or decontamination, the user must ascertain
with IKA that this method does not damage the device�

Maintenance and cleaning

Spare parts order:
When ordering spare parts, please give:
- machine type
- manufacturing number, see type plate
- item and designation of the spare part,
see www.ika.com, spare parts diagram and list
- Software version�
Repair:
Please send the device for repair only after it has
been cleaned and is free from any materials which
may constitute a health hazard.
For repair, please request the "Decontamination Certificate"
from IKA, or download printout of it from the IKA website
www.ika.com�
If you require servicing, return the device in its original pack-
aging� Storage packaging is not sufficient� Please also use
suitable transport packaging�
USB A
15