Table of Contents
Advertisement
2.11 Maintenance Menu
2.11.1 Sensor Calibration
1 Latest date and time that calibration has been conducted.
2 Probe serial number.
3 Raw probe value when doing zero calibration.
4 Raw probe value when doing Slope calibration.
5 Probe condition: Minus sign means the probe is not suitable for doing the next experiment
and needs to be replaced.
6 CAL button to start conducting the probe calibration.
68
1
2
3
4
5
2.11.2 Pump Calibration
1 Latest date and time that calibration has been conducted.
2 Tubing inner diameter.
3 Set value that used to calibrate pump in the last calibration.
4 The value that is able to measured by the device when the user gives a set point.
5 Calibration constant (Use internally to adjust pump accuracy).
6 CAL button to start conducting the probe calibration. Filling button is used to fill an empty
tube with liquid to help increase calibration accuracy and even useful to fill and empty tube
before starting every experiment.
6
1
2
3
4
5
6
69
Advertisement
Table of Contents
