Table of Contents
Advertisement
2.5.12 pO2 Control
Mode:
› Off: Turn off
› Manual: To control the output power (%) of the pO2 controller directly with Cascade control
table from the setup.
› Auto: To enter pO2 value (% saturate) with Cascade control table from the setup.
› Profile: To set pre-defined group of set values (up to 10) which will be executed in a period
of pre-defined time.
pO2 Cascading: Visualize the set value from Cascade table in the graph
1
3
54
2
2.6 Setup (Recipe) Menu
To create, save and restore the setup:
› Re-use previous configuration of the component use in the experiment.
› Information to generate experiment report when the experiment is done.
› Reflect to visualize the process view (i.e. Vessel type, Gas, Pump and accessories).
IMPORTANT:
One of the saved setups must be assigned to every experiment before start!
2.6.1 General
1 To select experiment mode (Batch, Fed-batch and Continuous)
2 Selecting data logging interval
3 Select data saving location: internal control tower, internal memory or external, i.e. USB stick
4 Note: to enter note or information for the setup.
5 Load the setup from the device
6 Save the current setup into the device
7 Clear all setup in the UI to default value
4
5
6
7
1
2
3
55
Advertisement
Table of Contents
