Table of Contents
Advertisement
2.12.2 Alarm setting
1 To enable / disable limit alarm.
2 Lower limit: If the actual value is lower than the lower limit, an alarm signal will be triggered.
3 Higher limit: If the actual value is higher than the higher limit, an alarm will be triggered.
72
2
3
1
2.12.3 System
Notice!
!
This section should be used carefully!
The menu allows to change the system parameter, delete or restore configuration which may
not be compatible with the device!
Only admin level user can access some menu on the screen.
However some menu will need IKA services with service level password to access and change
the parameter.
1 Restore factory default configuration.
2 Export current to JSON file.
3 Import JSON file to upload the new configuration to the device
4 Change device type.
IKA service only!
The type of the device may change when an upgrade with add-on component or the chang-
ing of some PCBA is made!
5 The function intended use for IKA service only.
6 The function intended use for IKA service only.
1
2
3
4
5
6
73
Advertisement
Table of Contents
