Cisco 8800 Series User Manual page 138

Set Up a Proxy Server from the Phone Web Page
Table 6: HTTP Proxy Settings
Parameter
Proxy Mode
Use Auto Discovery (WPAD)
PAC URL
Proxy Host
Proxy Port
Proxy Server Requires Authentication
Username
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
124
Description
Choose the proxy mode for the HTTP proxy setting.
Options are:
• Auto
• Manual
• Off
Default: Off
Select Yes to use the Web Proxy Auto-Discovery
(WPAD) mechanism to automatically retrieve a Proxy
Auto-Configuration (PAC) file.
If the parameter is set to No, you must configure PAC
URL.
This parameter is available when you set Proxy Mode
to Auto.
Default: Yes
URL locating the PAC file.
This parameter is available when you set Proxy Mode
to Auto and Use Auto Discovery (WPAD) to No.
Server address (hostname or IP address) of the proxy
server.
Do not provide the scheme (
This parameter is available when you set Proxy Mode
to Manual.
Port number of the proxy server.
This parameter is available when you set Proxy Mode
to Manual.
If your proxy server requires authentication, select
Yes. Otherwise, select No. The parameter
configuration depends on the actual behaviour of the
proxy server.
This parameter is available when you set Proxy Mode
to Manual.
Enter a username of a credential user on the proxy
server.
This parameter is available when you set Proxy Mode
to Manual and Proxy Server Requires
Authentication to Yes.
Settings
or ).
http:// https://