Executive Settings; Activate Call Filtering As An Executive - Cisco 8800 Series User Manual

Executive Settings

Before you begin
Your administrator specifies the profile authentication type on your phone and provides you with the
authentication credentials.
Procedure
Step 1
Press Applications
Step 2 Select Device administration > Profile account setup.
Your username and password are automatically filled. These fields are blank if your username and password
were not added before.
Step 3
Press Sign in to save your username and password.
Note
Step 4 (Optional) Enter a new username and password if you want to login with another set of credentials.

Executive Settings

If your administrator has configured you as an executive user with a pool of assistants, you can configure the
following settings to share control of your calls with your assistants:
• You can active or deactivate call filtering. If your extension connects to the XSI BroadWorks server,
• You can check the Opt-in/Opt-out status of your assistants.
Important

Activate Call Filtering as an Executive

Perform this task to active call filtering. If your administrator configures your extension to connect to the XSI
BroadWorks server, you can also select the call filtering mode and call filtering type.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
138
.
If any of the Username field or the Password field is empty, the phone displays a grey Sign in
softkey and you can't press the softkey.
you can also select the call filtering mode and type.
When call filtering is on, your incoming calls go to your assistants according to the criteria configured
by your administrator on the BroadWorks server.
You also receive your incoming calls that go to your assistants, if your administrator has enabled call
screening for you.
The assistants with the Opt-in status have controls of the executive's calls.
The menu items that display on the phone screen are different in the following scenarios:
• Your administrator enables the feature key synchronization (FKS) on your extension.
• Your administrator connects your extension to the XSI BroadWorks server.
Settings