Control Ringer Volume; Forward Calls From Your Phone - Cisco 8800 Series User Manual

Settings
If you don't want to specify a ringtone for the phone line, choose No ring. Your phone doesn't ring when
receiving an incoming call.
Step 3
Click Submit All Changes.

Control Ringer Volume

You can control the ringer volume of an incoming call on the phone, or from the phone administration web
page.
If your administrator restricts your ability to control the ringer volume, you can't perform this task from either
the phone volume key or from the phone administration web page.
Before you begin
Your administrator must allow you to control the ringer volume.
Procedure
To control the ringer volume do one of the following.
• On the phone, press the Volume
• On the phone administration web page, access the User Login > Advanced and then select Voice >

Forward Calls from Your Phone

You can set up your phone to forward incoming calls after navigating to the Call forward settings screen.
There are two other methods to set up the call forward services. To set up the call forward services by a specific
softkey, see
Forward Calls with the Phone Web Page, on page
When your administrator restricts your ability to control the ringer volume, a message appears
Note
indicating that you have no permission to change the ringer volume.
User > Audio Volume. Enter a value for the Ringer Volume parameter and click Submit All Changes.
The valid value for the Ringer Volume parameter ranges from 0 to 15.
Note When your administrator restricts your ability to control the ringer volume, the Ringer Volume
parameter doesn't appear under the Audio Volume section.
Forward Calls, on page
or button to reduce or to increase the volume.
52. To set up the call forward services from the phone web page, see
53.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide

Control Ringer Volume

115