Cisco 8800 Series User Manual page 195

Accessories
Remove a Bluetooth Headset
Remove your Bluetooth headset if you aren't going to use it with your phone again.
Procedure
Step 1
Press Applications
Step 2 Select Bluetooth > Devices.
Step 3
Select a Bluetooth headset and press Delete.
Wireless Headsets
You can use most wireless headsets with your phone. For a list of supported headsets, see
http://www.cisco.com/c/en/us/products/unified-communications/uc_endpoints_accessories.html.
Refer to your wireless headset documentation for information about connecting the headset and using its
features.
Swap Headsets While on a Call
You can connect an analog headset, a Bluetooth headset, and a USB headset simultaneously to your phone.
However,you can use only one headset at a time.
When you connect multiple headsets to the phone, you can switch among the headsets during a call by pressing
the Headset key on the phone. Though the phone is connected to multiple devices, you see a specific headset
is selected as the preferred audio device in the following priority order:
• When you connect a USB headset, a Bluetooth, and an analog headset to the phone, you can make your
• When you connect a Bluetooth and an analog headset to the phone, you can make your Bluetooth device
• When you connect only an analog headset to the phone, you make your analog headset the preferred
Procedure
Step 1 Before you make or answer a call, press Headset.
Step 2 (Optional) If you place a call, dial the number.
.
USB headset the preferred audio device.
the preferred audio device. The Bluetooth headset takes priority over wired headset, so audio is sent or
received from Bluetooth headset and there will be no audio on wired headset.
audio device.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
Remove a Bluetooth Headset
181