Change The Display Mode; Specify An Audio Device For A Call - Cisco 8800 Series User Manual

Settings
<Display_Brightness ua="rw">15</Display_Brightness>
The allowed value is an integer ranging from 4 through 15. The bigger the value, the brighter the screen
display. The default value is 15.
Step 4 Click Submit All Changes.

Change the Display Mode

Procedure
Step 1 Press Applications
Step 2 Select User preferences > Attendant console preferences > Display mode.
The following options are available:
• Name
• Ext
• Both
Step 3 Choose the display mode and press Set.

Specify an Audio Device for a Call

You can connect an analog headset, a Bluetooth headset, and a USB headset simultaneously to your phone.
However, you can use only one headset at time.
When you connect multiple headsets to the phone, you can choose the audio device to use for a call. Your
choice applies when you place or answer a call with a line key or the corresponding softkey.
Procedure
Step 1
Press Applications
Step 2 Select User preferences > Audio preferences > Preferred audio device.
Step 3 Press Select to choose one of the options:
• None—Selects the last used audio device.
• Speaker—Selects the speakerphone as the audio device.
• Headset—Selects a headset as the audio device. A headset priority order is:
.
.
• USB (highest)
• Bluetooth (medium)
Cisco IP Phone 8800 Series Multiplatform Phones User Guide

Change the Display Mode

135