Cleaning Units - HAKO Scrubmaster B 120 R Service Booklet

6. Machine settings
6.1 Basic settings

6.1.1 Cleaning units

Four different brush units are used with the Scrubmaster B120R.
Two plate brush units with a working width of 75 cm or 90 cm; as well as two
cylindrical brush units with a working width of 70 cm or 85 cm.
This setting is necessary for correct functioning of the overload limits and water
quantities.
To check and change the setting of the cleaning units, access the programming level
as described in Chapter 2.2.4. The possible setting parameters for the operative units
are specified in Table 6.1.
Sheet 45