Information About The Parameter Description; Tips For Data Entry In The Parameter Menu; Line Overflow; Entering Network Addresses - Novexx Solutions ALX 73 Series Service Manual

04/15 Rev. 06

Information about the parameter description

Tips for data entry in the parameter menu

Line overflow

If the displayed text is longer than the length of the line in the display:
Move text to the left:

Move text to the right:

Entering network
To move to the next/preceding alphanumeric character:
addresses

Confirm the selection and move to the next position:



Quick adjustment

[Tab. 3] Key combinations for quick adjustment of parameters with a large value range.

LABEL SETUP menu

Load prod.profil

Load product profiles from the internal database.
Product profiles contain product-specific settings.
Max. 16 product profiles can be selected.
The number of a product profile can only be selected if a profile is already stored under
that number.

Gap detect. mode

After the following events the dispenser needs to detect the punch again, i.e. initialise
the label material: after switching on; after changing material.
Settings: [Manual, "Autom. forward"]
SERVICE MANUAL
• The setting range or the individual settings of a parameter are shown in square
brackets.
• For parameters with individual setting values, the preset value is shown in italic
type.
Press the key.
Press the key.
Press the or key.
Press the key.
It is also possible to make entries using the WEB server function.
Keys Effect
+ Reduce value ten times faster
+ Increase value ten times faster
+ Reset value to lowest setting
• Manual: The operator must start the initialisation of the the label material manually
(by pressing the feed key several times).
• Autom. forward: The label material is initialised automatically if necessary.
ALX 73x Information about the parameter description
Dispenser Parameter menu
6