FemtoClock®2 GUI User Guide
11.2.2. Disabling the Output Terminations
1. Go to the block diagram view.
2. Click the advanced button under the desired output.
3. Enable the HCSL terminations through the check box under the "HCSL" header.
11.3 Configuring the Device for Write Frequency Mode
1. Go to the block diagram view.
2. Change the Operation Mode to "DCO".
3. Adjust the frequency control word through the "Frequency Control goal (ppt)" data field.
R31US0004EU0100 Rev.1.0
Apr 22, 2021
Page 18