Dpll Block - Renesas FemtoClock 2 User Manual

FemtoClock®2 GUI User Guide
8.4

DPLL Block

The DPLL block is only accessible when the device operation mode is set to "Jitter Attenuator". This block
contains all features pertaining to the DPLL. Clicking on the DPLL block allows the user to enable reveritive or
hitless switching, adjust the phase offset, and even change the digital loop filter settings.
Note: Some FemtoClock2 devices may not have the ability to use this feature.
R31US0004EU0100 Rev.1.0
Apr 22, 2021
Page 13