Table of Contents
Advertisement
FemtoClock®2 GUI User Guide
7. Register View
The register view shows a graphical diagram of the registers and allows the user to read or write any of the
individual registers. By clicking on the individual register block, the given registers for that block will appear to the
right. They can either be adjusted by writing directly to the diagram or entering values into the data fields on the
right.
8. Block Diagram View
The block diagram view reflects the datasheet representation of the FemtoClock2 devices. From the main
diagram, users can adjust the operation mode, set the output frequency and type, change the output divider, set
the Xin frequency and the input frequency, and view the output frequency estimate. Each block has its own pop-
out page. This can be accessed by clicking on the block.
R31US0004EU0100 Rev.1.0
Apr 22, 2021
Page 10
Advertisement
Table of Contents
